In this study, we construct an analytical model to investigate the system throughput of 802.15.3c WPAN by examining hybrid slotted CSMA/CA-TDMA and slotted CSMA/CA multiple access methods. Our analysis clearly shows the differences between the system throughputs of both multiple access methods. The obtained results show that the hybrid slotted CSMA/CA-TDMA can achieve a considerably higher system throughput compared to the slotted CSMA/CA; the difference between the two access methods is especially pronounced as the increase in the number of devices contending for the network increase. The system throughput comparisons have established why the hybrid slotted CSMA/CA-TDMA is preferred over the slotted CSMA/CA for high-speed wireless communications of the 802.15.3c WPAN.

This paper proposes a self frequency preset (SFP) PLL synthesizer to realize a simple frequency preset PLL synthesizer with temperature-resistant and shorter frequency settling time than the conventional temperature un-compensated phase and frequency preset (PFP) PLL synthesizer. Since the proposed synthesizer employs a simple frequency locked loop (FLL) circuit to preset the output frequency at each frequency hopping period, the synthesizer eliminates the need to store f-V characteristic of the VCO in ROM. The frequency settling time of the proposed synthesizer is theoretically and experimentally analyzed. The theoretical analysis using the realistic f-V characteristic of a IF band VCO show that the frequency settling time of the proposed synthesizer is 130µs shorter than that of the conventional PFP PLL synthesizer at 40MHz hopping in the 200MHz band for all temperatures. Furthermore, the experimental results confirm that the frequency acquisition time of a prototype FLL circuit is accordant with the calculated results. Thus, the proposed SFP PLL synthesizer can achieve faster frequency settling than the conventional PFP PLL synthesizer for all temperatures and its simple configuration allows to be easily implemented with existing CMOS ASIC devices.

This study focuses on system throughput by taking into account the channel interference in IEEE 802.15.3c WPAN, which is based on the hybrid multiple access of CSMA/CA and TDMA, namely CSMA/CA-TDMA. To study the system throughput, we construct a novel analytical model by taking into consideration the channel interference caused by the hidden networks in CSMA/CA-TDMA. The obtained results show that the system throughput achieved by TDMA is highly affected by frame transmission in CSMA/CA. Furthermore, we show that channel interference, which causes a degradation in the system throughput, is a very significant problem in the IEEE 802.15.3c WPAN.

This paper proposes a suitable combination of the digital modulation schemes and the coding-rate of forward error correction (FEC) schemes for satellite digital video communication networks. The comparative study is carried out by computer simulation considering non-linearly amplified, narrow bandwidth satellite channels with adjacent channel interference signals. The proposed system employs an offset QPSK modulation scheme supported by the coding-rate of 7/8 convolutional encoding and Viterbi decoding to realize high-quality and compact spectrum characteristics in non-linear channels. By employing a 32Mbps DPCM video codec, the developed prototype system achieves a post demodulated S/N ratio of higher than 52dB. Moreover, it achieves high protection ratio against co-channel interference than conventional analog FM systems. The optimized digital video transmission system makes it possible to transmit high-quality NTSC video signals over non-linearly amplified narrow bandwidth satellite channels, for example 27MHz or 36MHz bandwidth transponders, with high-security digital encryption.

This paper investigates the communication range and interference range of millimeter-wave wireless personal area networks (WPAN) based on realistic system design. Firstly, the effective communication range of the millimeter-wave networks are calculated based on realistic physical (PHY) layer design and 60 GHz channel obtained from actual measurements. Secondly, an interference model is developed to facilitate the analysis of the impact of interferer-to-victim range on the victim link performance. It is found that system with BPSK modulation is able to support use cases with higher number of portable devices within a 3 m range, while system with 16QAM modulation is more suitable for fixed high speed data streaming devices within a shorter range of 1 m. Also, the interferer-to-victim range that causes no interference in all conditions is found to be approximately 40 m, while a 25 m range causes a typical bit error rate (BER) degradation of 1-digit (e.g. BER = 10-6 to 10-5).

This paper proposes a new burst coherent demodulator that improves transmission quality of microcellular TDMA/TDD systems for personal communications and has configuration suitable for low power consumption with LSIC-implementation. To achieve the better transmission quality, the proposed demodulator employs coherent detection with a unique carrier recovery scheme that can operate without any preamble for carrier recovery. In addition, the demodulator uses a clock recovery scheme with clock phase estimation using twice differentiation, which eliminates hangup and attains fast clock acquisition at 2 samples/symbol. Experimental results clarify the superiority of the proposed coherent demodulator for microcellular TDMA/TDD systems. The proposed coherent demodulator reduces the irreducible frame error rate by 40%, and achieves 4dB improvement at the frame error rate of 10% compared with differential detection under the Rayleigh fading (fD/fs=810-5, τrms/Ts=510-2) typical of personal communication environments.

This paper proposes a superposed SSMA (Spread Spectrum Multiple Access)-QPSK (Quadrature Phase Shift Keying) signal transmission scheme over high speed QPSK signals to achieve higher frequency utilization efficiency and to facilitate lower power transmitters for SSMA-QPSK signal transmission. Experimental results show that the proposed scheme which employs the coding-rate of one-half FEC (Forward Error Correction) and a newly proposed co-channel interference cancellation scheme for SSMA-QPSK signals can transmit twenty SSMA-QPSK channels simultaneously over a nonlinearly amplified high speed QPSK signal transmission channel and achieve as ten times SSMA channels transmission as that without co-channel interference cancellation when the SSMA-QPSK signal power to the high speed QPSK signal power ratio equals -30dB. Moreover, cancellation feasibility generation of the interference signals replica through practical hardware implementation is clarified.

This paper proposes a prioritized aggregation method that supports compressed video transmission on millimeter wave wireless personal area network (mmWave WPAN) systems. Frame aggregation is an effective means to improve system efficiency and throughput for wide band systems such as mmWave WPAN. It is required by the applications that the mmWave WPAN systems should provide Gbps or multiGbps transmission capability. The proposed scheme targets not only transmission efficiency but also support of compressed video transmission which currently is very popular. The proposal combines MAC layer aggregation with PHY layer skew modulation to facilitate the video transmission in a way that more important data is better protected. Simulation results show that the average peak signal to noise ratio (PSNR) performance is improved by 5 dB compared to conventional method, while the Gbps transmission requirement is fulfilled.

Since the first use of mobile satellite communications in 1976 by MARISAT, a number of studies have been carried out to expand their application from international to regional, and to domestic services. By employing the conventional satellites for fixed satellite communications, domestic mobile satellite data communication services have been in commercial use since 1989. Moreover, domestic mobile satellite communication systems employing dedicated satellites to mobile satellite communication are scheduled for commercial operation in Australia, Canada and the USA. Prior to this operation, preliminary mobile satellite communications services employing the MARISAT and MARECS B-2 satellites for data transmission started in Canada and the USA in 1990. Furthermore, more sophisticated and advanced mobile satellite communication systems such as personal communication systems are under development in various countries. This paper reviews the current and future mobile satellite communication systems and related technologies.

This paper proposes a hybrid multiband (MB) ultra wideband (UWB) system with direct sequence (DS) spreading. The theoretical error analysis for the DS-MB-UWB multiple access system with Rake receiver in the presence of multipath and narrowband interference is developed. The developed theoretical framework models the multiple access interference (MAI), multipath interference (MI) and narrowband interference for the designed UWB system. It is shown that the system error performance corresponding to the combining effects of these interference can be accurately modeled and calculated. Monte Carlo simulation results are provided to validate the accuracy of the model. Additionally, it is found that narrowband interference can be mitigated effectively in the multiband UWB system by suppressing the particular UWB sub-band co-existing with the interfering narrowband signal. A typical improvement of 5 dB can be achieved with 75% sub-band power suppression. On the other hand, suppression of UWB sub-band is also found to decrease frequency diversity, thus facilitating the increase of MAI. In this paper, the developed model is utilized to determine the parameters that optimize the UWB system performance by minimizing the effective interference.

This paper presents a fully digital high speed (60 Mb/s) Quadrature Phase Shift Keying (QPSK)/Offset QPSK (OQPSK) burst demodulator for radio applications, which has been implemented on a 0.5 µm Complementary Metal Oxide Semiconductor (CMOS) master slice Very Large Scale Integrated circuit (VLSI). The developed demodulator VLSI eliminates analog devices such as mixers, phase-shifters and Voltage Controlled Oscillator (VCO) for bit-timing recovery, which are used by conventional high-speed burst demodulators. In addition to the fully digital implementation, the VLSI achieves fast carrier and bit-timing acquisition in burst modes by employing a reverse-modulation carrier recovery scheme with a wave-forming filter for OQPSK operation, and a bit-timing recovery scheme with bit-timing estimation and interpolation using a pulse-shaping filter. Results of performance evaluation assuming application in Time Division Multiple Access (TDMA) systems show that the developed VLSI achieves excellent bit-error-rate and carrier-slipping-rate performance at high speed (60 Mb/s) with short preamble words (less than 100 symbols) in low Eb/No environments.

This paper proposes a high resolution and fast frequency settling PLL synthesizer for frequency hopping radio communication equipment. The proposed synthesizer enables the carrier frequency to be changed within the duration of a burst signal and yields higher frequency resolution than the reference signal frequency. To reduce frequency settling time without degradation of frequency resolution and phase noise, this paper proposes a new phase and frequency preset (PEP) PLL synthesizer which employs a digital phase accumulator to generate high resolution reference signal. Experimental results show that the settling time of a prototype synthesizer is less than 300µs while spurious signals are suppressed by more than 55 dB. In comparison with conventional PLL synthesizers, the frequency settling time is reduced by 80%. Furthermore, the higher frequency resolution than the reference signal is successfully demonstrated. Therefore, the proposed PFP PLL synthesizer with the digital reference signal can achieve the output signal with high frequency resolution less than 1Hz.

IEEE 802.15.3c has been standardized for wireless personal area networks (WPANs) to realize high-speed wireless communications with 1 Gbps throughput. In this paper we introduce a 802.15.3c WPAN prototype. The introduced 802.15.3c WPAN prototype applies the enhanced MAC functions of data separation on hybrid multiple access, long frame size, aggregation, block acknowledgment, and timing operation, which can realize Gbps throughput in IEEE 802.15.3c. Moreover, the experiment performance studies on the prototype show that around 1.6 Gbps throughput can be successfully achieved and video streaming applications can be accommodated. Also, our studies provide the useful information of MAC capacity for developing the 802.15.3c devices.

In this paper, throughput and error performance analysis is conducted on the proposed space-time resource management (STRM) scheme to realize a multi-Gbps millimeter-wave wireless personal area network (WPAN) system. The proposed STRM allows multiple peer-to-peer communication links to occupy the same time-division-multiple-access (TDMA) time slot, in contrary to the conventional TDMA system that allocates only one time slot to one communication link. Theoretical analysis is performed to investigate the achievable system throughput in the presence of co-channel interference (CCI) generated by communication links co-sharing the same time slot. To increase accuracy, the analysis results are validated by Monte Carlo simulations. Firstly, it is found that the upper bound of the achievable throughput increases linearly with the number of communication links sharing the same time slot. However, optimum throughput exists corresponding to the CCI present in the system. Secondly, by manipulating a parameter that controls the allowable CCI in the network, the system throughput can be optimized. Lastly, it is also found that in a millimeter-wave band system, a victim system with transmitter-receiver separation of 1-meter can achieve bit error rate (BER) of 10-6 provided that the interferer is at least 6-meters away.